FP/FR1100/1200/2000 V6: Installation and Commissioning Manual 21
4.2.3 Panel layout
Figure 7: Panel layout
1. Numeric keypad 15. 2 x battery
2. Common LED board 16. Power supply and battery charger
3. LCD Display and backlight board 17. Modem (optional)
4. Host processor board 18. Optional ARCNET network card
5. Current loop terminal connections 19. Host power supply board
6. RS232 ports (DB-9connectors) (port 1-front; port 2-back) 20. Bus-termination card
7. DB9-DB25 adapter (with modem) 21. DIP switch
8. Front-end processor board 22. Zone matrix display board
9. FEP power supply board 23. Optional internal printer (PR2000)
10. 2 Loop driver board (x2) 24. Service/commission mode switch
11. Sounder relay board 25. Non-volatile memory lock
12. Auxiliary inputs terminal connections 26. Memory back-up battery jumper
13. Loop 1-4 terminal connections 27. Optional third source battery
14. Terminal connections sounder board
To Next Page
Loading...