Interlogix FP 2000 Series - 3.2.2 Standard Inputs; 3.2.3 Power Supply Characteristics

12 FP/FR1100/1200/2000 V6: Installation and Commissioning Manual
Standard Outputs
(All standard outputs are
located on the sounder
board.)
FP/FR1xxx & FR2000
(
FP1100 and FP1216 only;
FP1200 optional – SD1200
board used)
FP1216EN & FP1264
(SD2000 board)
FP/FR2xxx
(FP2xxx only -
SD2000 board used)
OUT5 – OUT8:
4 programmable relays
(Three terminals each:
COM - NO – NC)
Maximum switching current: 2 A
@ 24 VDC
Maximum power rating:
50 W DC
250 VA
Maximum switching
current:
2 A @ 24 V DC
Maximum power rating:
50 W DC
250 VA
Maximum switching
current:
2 A @ 24 VDC
Maximum power rating:
50 W DC
250 VA
* The maximum specified current of 100 mA for Output 1 and Output 2 can be exceeded as long as the total
current drawn by the outputs (1-4) is limited to 400 mA.
3.2.2 Standard Inputs
Standard Inputs FP/FR1xxx & FR2000
(FP1100 and FP1216
only; FP1200 optional –
SD1200 board used)
FP1216EN & FP1264
(SD2000 board)
FP/FR2xxx
(FP2xxx only – SD2000
board used)
Sounder card 4 x supervised inputs
(inputs 1-4)
3.3 kOhm termination
4 x supervised inputs
(inputs 1-4)
3.3 kOhm termination
4 x supervised inputs
(inputs 1-4)
3.3 kOhm termination
FEP board (FP2xxx and
FB2x00 only)
4 x auxiliary inputs
15 VAC or 20-28 VDC
3 mA
3.2.3 Power Supply Characteristics
Power Supply
Characteristics
FP/FR1xxx &
FR2000
FP1216EN &
FP1264
FP/FR2xxx FR2032/20128
FR2064/20255
Input 230 VAC (+10%, -
15%)
50 Hz (±10%)
50 VA
21 – 28 VDC
24 V standby battery
230 VAC (+10%, -
15%)
50 Hz (±10%)
220 VA
21 – 28 VDC
24 V standby battery
230 VAC (±15%)
50 Hz (±10%)
200 VA
21 – 28 VDC
24 V standby battery
21 – 28 VDC
24 V standby battery
Output Aux. Power:
19-27.5 VDC, 100
mA (max)
Modem: 5 VDC
(±0.1V), 75mA (max)
Battery charge: 27.6
VDC (±0.2 V) @ 25
°C, 300 mA (max)
Aux. Power: 19-27.5
VDC, 100 mA (max)
Modem: 5 VDC
(±0.1V), 75 mA
(max)
Battery charge:
27.6 VDC (±0.2 V) @
25 °C, 1.6 A (max)
Auxiliary Voltage:
20.5-28 V
27.6V DC battery
charge voltage, 4A
total (battery charge
and aux. with or
without batteries.)
Supervisory - Mains fail
- Battery disconnect
- Mains fail
- Battery disconnect
- Mains fail
- Battery disconnect
- Mains fail
- Charger fail