64 TruVision NVR 10 User Manual
Appendix D “Default menu settings” en page 135). When modifying the settings of a
plug and play IP camera, the settings remain in place until the camera is
disconnected and reconnected. Upon reconnection, the camera automatically
returns to its default settings.
• Manual: Use this method if the IP cameras are located on a different LAN from the
NVR or are located on the internet.
Note: If you configure an IP camera “plug and play” and subsequently change it to
“manual”, the camera settings are then saved to the PoE port to which the camera is
connected.
See Figure 11 on page 65 for information on the IP camera window.
To Next Page
Loading...
