Interlogix xgen User Manual

108 xGen Installation & Programming Guide
Menu Overview
Instructions
1. Go to Communicator, System Event Reporting
2. Select a Channel Group.
3. DONE. Your xGen will now report system events to the Channels selected in
the Channel Group you just selected.
5. Channels 18. Channel Groups
6. Communicator
17. Event Lists
17. Event Lists
18. Channel Groups
6. Communicator
a) Options
b) IP Config
c) Ethernet
d) Radio
e) Dial IP
f) Email
g) Remote Access
h) System Event Reporting

Interlogix xgen Specifications

General

Brand	Interlogix
Model	xgen
Category	Security System
Language	English