Interlogix xgen User Manual

xGen Installation & Programming Guide 77
Next
• Zones are assigned to one or more Partitions using Partition Groups. If
necessary program Partitions and Partition Groups, then assign a Partition
Group to each zone (step 8).
Programming Instructions for Partitions
Goal
Program Partitions, Entry/Exit Times, Reporting Options, and Partition Groups.
Pre-conditions
Programmed Communicator, Channels, and Channel Groups.
Notes
Partition Counting requires an xGen Door Controller module to function.

Interlogix xgen Specifications

General

Brand	Interlogix
Model	xgen
Category	Security System
Language	English