46 xGen Installation & Programming Guide
• Loss of wireless supervision – This zone is a wireless device and has lost its
communication link with the control panel
• Low battery – This zone is a wireless device and needs its battery changed
App and Web Error Messages
Various error messages may appear in the xGen Web Server and UltraConnect
app.
Advanced/Settings Configuration Menus
• "You must select a Menu before you can scroll" – An attempt was made to
scroll up or down from the top level menu.
• "Select a submenu from the list or select back to access the main menu" – An
attempt was made to scroll up or down from a submenu that has no additional
levels
• "Defaulting requires 2 levels" – a Shortcut was entered without two levels.
Read Write errors and results
• "Write Access Denied"
• "Nothing displayed can be Saved"
• "Program Success!"
• "Name Saved"
Zones Page
• "No Zones Configured For Your Access" – Displayed on Zones page when
there are no zones available to view
WiFi
• "Connection Was lost before a response was received" – Sent when No
response received on a WiFi network change
Data Entry Errors
• "Data must only contain the following characters"
• "Date must be of the form YYYY–MM–DD."
• "Day must be from 1 to 31"
• "Data entry must only contain the numbers 0 – 9 and A–F"
• "Data entry must only contain the numbers 0 – 9"
• "Data must be a number from X to Y"
• "Improper Time Value"
• "must be 4 to 8 digits
• "You must enter a user Number between 1 and 1048575"
To Next Page
Loading...
Need help?
General
