Interlogix xgen - Menu Overview

78 xGen Installation & Programming Guide
Menu Overview
Instructions
1. Go to Partitions
2. Select a Partition Number
3. Enter a descriptive name
4. Select the Options you want to enable for this Partition. Partition 2 and above
have “Use Partition 1 Options” ticked to allow faster programming of your
18. Channel Groups
6. Communicator
a) Options
b) IP Config
c) Ethernet
d) Radio
e) Dial IP
f) Email
g) Remote Access
h) System Event Reporting
5. Channels 18. Channel Groups
6. Communicator
17. Event Lists
4. Partitions
a) Partition Options
b) Partition Timers
c) Partition Reporting
12. Partition Groups
7. Schedule
18. Channel Groups