114 xGen Installation & Programming Guide
Instructions
1. Open Scenes
2. Select Event Type and the Partition
3. Select the Schedule that will determine when this Scene is active
4. Now program the sequence of actions that you want to happen
Example
When Exit Delay 1 is running in the Office Partition, set Camera 1 to start
recording.
Programming Instructions for Outputs
Goal
Turn an output on or off according to an Action
Pre-conditions
Program the Action and any associated components.
Notes
See xGen Reference Guide for more details on Actions.
Event 1 Event 2 Event 3 Event 4
Action
State
and
or
=
Action
Result
and
or
and
or
+
To Next Page
Loading...
