38 xGen Installation & Programming Guide
Enable UltraConnect = ON
Web Access Code = not
00000000
Yes Yes
5. Enter a first name and PIN code:
Connect to xGen via UltraConnect App
UltraConnect is an app that allows you to control and program your xGen from an
Apple® iPhone/iPad, or Google Android device.
1. On your smartphone go to the Apple® App Store
TM
or Google Play
TM
store.
2. Search for UltraConnect.
3. Install the app.
4. Click the icon on your device to launch it.
5. Click + on the top right to add a new account, or the blue arrow to edit an
existing site.
6. Enter the details of your security system.
The serial number is printed on the back of the xGen panel. Alternatively log
in to xGen Web Server and go to Settings – Details to view it.
The default Web Access Passcode of 00000000 disables remote access. To
change it, log in to xGen Web Server and go to Settings - Network.
To Next Page
Loading...
Need help?
General
