Chapter 1 — About the Computer Features
CK3R and CK3X Mobile Computer User Manual 23
of the bar code. Make sure that the illumination beam covers the
bar code you are trying to decode.
When the imager successfully reads a bar code label, you hear a
high beep, and the Good Read LED turns on briefly.
3 Release the Scan button or trigger.
Connect a Bluetooth Scanner
You can connect the computer to an Intermec Bluetooth scanner, such
as the SF51, SG20, or SR61. Make sure that the Bluetooth radio in the
computer is turned on before you try to connect to a scanner.
1 Tap Start > Settings > System > Wireless Scanning.
2 Tap Add Device.
3 Select Quick Connect, Search, or Manual. Follow the
instructions on the screen to add a Bluetooth scanner.
After you add a Bluetooth scanner, you can configure scanner
settings and parameters in Intermec Settings.
To Next Page
Loading...
