Chapter 1 — About the Computer Features
24 CK3R and CK3X Mobile Computer User Manual
Connect a Tethered Scanner
To connect a tethered scanner to your computer, use a CK3 RS-232
Adapter (Model AA21) and scanner RS-232 interface cable. For more
information, contact your local Intermec representative.
1 Connect the CK3 RS-232 adapter to the tethered scanner using the
scanner RS-232 interface cable.
2 Connect the adapter to the CK3.
3 Tap Start > Settings > System > Intermec Settings > Data
Collection > Tethered Scanner to configure the settings for the
tethered scanner.
Insert a microSD Card
Insert a micro Secure Digital (SD) card to increase file storage and
install software. The mobile computer supports microSD cards that
hold up to 32 GB of information. The microSD card slot is located in
the battery compartment.
1 Press the Power button to turn off the computer.
2 Remove the handstrap and the battery.
To Next Page
Loading...
