Chapter 3 — Configure the Computer
CK3R and CK3X Mobile Computer User Manual 57
Connect to a Wireless Reader
You can connect the computer to a Bluetooth RFID reader, such as the
IP30. Use Intermec Settings to configure or view information on your
connected RFID readers.
1 Tap Start > Settings > System > Wireless Readers.
2 Tap Add Reader.
3 Select Search or Manual. Follow the onscreen instructions to add
a wireless reader.
About Serial and USB Communications
You can use these accessories to transmit data to and receive data from
another device through serial or USB communications:
• AD20 single dock
• AV10 vehicle dock
• AA21 RS-232 adapter
• Desktop USB adapter
• USB snap-on adapter
• RS-232 DEX adapter
For information on these accessories, contact your local sales
representative.
To Next Page
Loading...
