Chapter 5 — Troubleshoot and Maintain the Computer
80 CK3R and CK3X Mobile Computer User Manual
Check Wi-Fi Network Status
If you have trouble connecting to your Wi-Fi wireless network:
• Make sure you have correctly set network parameters on the
computer.
• Check your wireless security settings.
Follow the next procedure to verify available access points and
networks, check signal strength, and view other diagnostics. If you
need to contact Intermec Product Support, this information can be
helpful in troubleshooting wireless network connection issues.
1 Tap Start > iSpyWiFi. The ISpyWiFi application launches:
The ISpyWiFi tab shows:
• MAC address and IP address of the Wi-Fi radio.
• network association status, including the SSID and MAC
address of the access point.
• security configuration.
• radio transmit power and signal strength information.
2 Tap the Scan tab to view a list of available Wi-Fi networks. The list
includes the signal strength, channel, and MAC address for each
network.
• Tap Scan to refresh the screen.
3 Tap the Supp tab to view radio supplicant information, including
a list of supplicant events and authentication status.
• To verify the settings for the currently active security profile, tap
Configure Profile. Intermec Settings launches for you to
configure Wi-Fi radio settings.
• To try reconnecting to the network, tap Reconnect.
• To delete the events in the list, tap Clear Events.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
