Intermec EasyCoder PF4i Installation Instructions

6 EasyLAN Wireless Interface Kit Installation Instructions
Chapter 1 — Introduction
 e following table indicates the areas of intended use of the equipment
and any known restrictions.
Country of
Intended Use
Yes No License
Required
Restric-
tions
Details
Austria X
Belgium X
Denmark X
Finland X
France X X 2454 to 2483 MHz
bands must not be
used outdoors on this
device.
Germany X
Greece X
Ireland X
Italy X
Luxembourg X
 e Netherlands X
Portugal X
Slovenia X
Spain X
Sweden X
United Kingdom X
Other non-EU:
Iceland X
Liechtenstein X
Norway X
Switzerland X
Additional EMI/RFI Compliance
 is device meets the Class B limit requirements of CISPR 22.

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g