Intermec EasyCoder PF4i Installation Instructions

EasyLAN Wireless Interface Kit Installation Instructions 43
5
Setup in IPL
 is chapter explains how to set up the wireless net-
work communication in printers running IPL v2.40
(or later).  e only requirement on the PC side is a
terminal program that can transmit and receive ASCII
characters on an RS-232 line.  us, this method is
recommended when you do not have the opportunity
to run the Intermec EasyLAN Network Setup wizard,
for example because you use some other operating
system than Windows.
For information on how to set up the network com-
munication in printers running Fingerprint, refer to
Chapter 4.

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g