Intermec EasyCoder PF4i Installation Instructions

42 EasyLAN Wireless Interface Kit Installation Instructions
Chapter 4 — Setup in Fingerprint
Default Router
If you have selected MANUAL as manual selection method, you can
specify a default router for the printer:
SETUP"NETWORK,DEFAULT ROUTER,nnn.nnn.nnn.nnn"
Name Server
If you have selected MANUAL as manual selection method, you can
specify a name server for the printer:
SETUP"NETWORK,NAME-SERVER,nnn.nnn.nnn.nnn"
Finishing the Setup
You can now disconnect the printer from the PC and use your web
browser to test the wireless communication as described in Chapter 6,
assuming that there is a working wireless LAN and the printer is inside
the coverage area of an access point.

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g