Intermec EasyCoder PF4i Installation Instructions

EasyLAN Wireless Interface Kit Installation Instructions 27
4
Setup in Fingerprint
 is chapter explains how to set up the wireless net-
work communication in printers running Intermec
Fingerprint v8.40 (or later).  e only requirement
on the PC side is a terminal program that can trans-
mit and receive ASCII characters on an RS-232 line.
 us, this method is recommended when you do not
have the opportunity to run the Intermec EasyLAN
Network Setup wizard, for example because you use
an operating system other than Windows.
For information on how to set up the network com-
munication in printers running IPL, refer to
Chapter 5.

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g