EasyManuals Logo

Intermec EasyCoder PF4i Installation Instructions

Intermec EasyCoder PF4i
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
EasyLAN Wireless Interface Kit Installation Instructions 25
Chapter 3 — EasyLAN Network Setup
Press the <i> key on the printer’s keyboard to check that the printer
uses either auto or an RS-232 serial channel as I/O channel.
Check that the communication is working.
Also refer to the printer User's Guide and the Fingerprint or IPL Program-
mmers Reference Manual.
Installing EasyLAN Network Setup
1 Insert the PrinterCompanion CD into the CD ROM reader of your
PC.  e CD should autostart and launch the home page. Locate and
click the name of your EasyCoder printer in the left-hand main menu.
e page for your printer appears.
2 Choose Networking from the left-hand menu.  e Networking page
appears.
3 Click the Network Software Tools link.  e Network Software Tools
page appears.
4 Click EasyLAN Network Setup link.  e File Download dialog box
appears.
5 Click Open.
6 Follow the prompts to accept the license agreement, choose a destina-
tion folder for EasyLAN Network Setup, and install the program.
7 When the installation is complete, click Finish.
Starting EasyLAN Network Setup
Before you begin, connect the EasyCoder printer to the serial port on
your desktop PC.
To start EasyLAN Network Setup
In the Start menu on your desktop PC, choose Programs > Intermec
> Intermec EasyLAN Network Setup > Intermec EasyLAN Network
Setup.  e Introduction screen appears.

Other manuals for Intermec EasyCoder PF4i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intermec EasyCoder PF4i and is the answer not in the manual?

Intermec EasyCoder PF4i Specifications

General IconGeneral
Print technologyDirect thermal
Maximum resolution203 x 203 DPI
Standard interfacesRS-232, USB 2.0
Internal memory16 MB
Power consumption (standby)15 W
Power consumption (printing)300 W
Media thickness3/7.5 mm
Maximum label width104 mm
Maximum label length0.4 m
Maximum roll diameter152.4 /213 mm
Maximum internal memory1 GB
Supported network protocolsTCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product colorBlue, Silver
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)40 - 104 °F
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth405 mm
Width244 mm
Height178 mm
Weight8000 g

Related product manuals