Intermec EasyCoder PF4i Installation Instructions

26 EasyLAN Wireless Interface Kit Installation Instructions
Chapter 3 — EasyLAN Network Setup
For complete information on using EasyLAN Network Setup, click
Help.
User and Password
By default, the user is admin and the password is pass. Initially, this user
and password gives unrestricted access to all setup parameters, except
Region. Changing the Region requires a special password, which is dis-
tributed only to authorized personnel.
Use of the EasyLAN Wireless network interface with an
incorrect REGION setting may be in violation of applicable
laws.

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g