Intermec Technologies Corporation
Corporate Headquarters
6001 36th Ave. W.
Everett, WA 98203
U.S.A.
www.intermec.com
e information contained herein is proprietary and is provided solely for the
purpose of allowing customers to operate and service Intermec-manufactured
equipment and is not to be released, reproduced, or used for any other purpose
without written permission of Intermec.
Information and specifi cations contained in this document are subject to
change without prior notice and do not represent a commitment on the part of
Intermec Technologies Corporation.
© 2005 by Intermec Technologies Corporation. All rights reserved.
e word Intermec, the Intermec logo, Norand, ArciTech, CrossBar, Data
Collection Browser, dcBrowser, Duratherm, EasyCoder, EasyLAN, Enterprise
Wireless LAN, EZBuilder, Fingerprint, i-gistics, INCA (under license), Inter-
Driver, Intermec Printer Network Manager, IRL, JANUS, LabelShop, Mobile
Framework, MobileLAN, Nor*Ware, Pen*Key, Precision Print, PrintSet, Route-
Power, TE 2000, Trakker Antares, UAP, Universal Access Point, and Virtual
Wedge are either trademarks or registered trademarks of Intermec Technologies
Corporation.
roughout this manual, trademarked names may be used. Rather than put a
trademark (™ or ®) symbol in every occurrence of a trademarked name, we state
that we are using the names only in an editorial fashion, and to the benefi t of
the trademark owner, with no intention of infringement.
ere are U.S. and foreign patents pending.
Torx is a registered trademark of Camcar Division of Textron Inc.
is product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (http://www.openssl.org/).
is product includes cryptographic software written by Eric Young
(eay@cryptsoft.com).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
