Intermec EasyCoder PF4i Installation Instructions

36 EasyLAN Wireless Interface Kit Installation Instructions
Chapter 4 — Setup in Fingerprint
To reinstall the default root CA certifi cate, install /rom/intermec.cer, or
remove the /c/ADMIN/root.cer fi le.
Examples
SETUP "8021x","EAP_TYPE","TTLS|LEAP|PEAP|OFF"
Sets preferred EAP type.
SETUP "8021x","EAP_USER","Admin01"
Sets logon username to “Admin01”.
SETUP "8021x","EAP_PASS","InfoTech"
Sets logon password to “InfoTech”.
SETUP "8021x","TTLS_USER","Manufacturing"
Sets TTLS outer name to “Manufacturing”.
SETUP "8021x","INNER_AUTH","PAP|MSCHAPv2|EAP/
MSCHAPv2|EAP/MD5|EAP/GTC"
Sets inner authentication type (TTLS/PEAP only).
SETUP "8021x","CA_CERT","/tmp/mycacert.cer"
Installs overriding CA certifi cate (TTLS/PEAP only).
SETUP "8021x","CA_CERT","/tmp/mycacert.
pfx@verysecret"
Installs overriding CA certifi cate (TTLS/PEAP only), encrypted with the
pass phrase “verysecret”.
SETUP "8021x",".SERVER_CN1","Printer33"
Sets common name 1 to “Printer33” (TTLS/PEAP only).
SETUP "8021x",".SERVER_CN2","Printer34"
Sets common name 2 to “Printer34” (TTLS/PEAP only).
SETUP "8021x","VALIDATE","ON|OFF"
Enables or disables validation of the server certifi cate (TTLS/PEAP
only).
SETUP WRITE/GET for all settings returns the set value, except for
EAP_PASS which always returns “****” if confi gured, and for “CA_
CERT” which returns the common name of the last certifi cate authority
successfully installed (but not the path to the fi le).

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g