Intermec EasyCoder PF4i Installation Instructions

4 EasyLAN Wireless Interface Kit Installation Instructions
Chapter 1 — Introduction
Note: To maintain compliance with FCC Rules, the input/
output (I/O) cables that interconnect between the device and
any peripheral must be as specifi ed by Intermec.
Industry Canada Compliance
 is Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
 is device requires a radio license, unless it is used totally inside a build-
ing. ( e user must obtain this license.)
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
Cet appareil exige une license radio à moins d’être entièrement installé
dans un bâtiment. (L’utilisateur doit obtenir cette license.)

Intermec EasyCoder PF4i Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power consumption (standby)	15 W
Power consumption (printing)	300 W
Media thickness	3/7.5 mm
Maximum label width	104 mm
Maximum label length	0.4 m
Maximum roll diameter	152.4 /213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Product color	Blue, Silver
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	405 mm
Width	244 mm
Height	178 mm
Weight	8000 g