ENGLISH
38
18 DECLARATION OF INCORPORATION
DECLARATION OF INCORPORATION
(In accordance with Annex II of European Directive 2006/42/EC)
The manufacturer INTERPUMP GROUP S.p.A. - Via E. Fermi, 25 - 42049 - S. ILARIO D'ENZA (RE) - Italy DECLARES that the
product identied and described as follows:
Designation: Pump
Type: Reciprocating plunger pump for high pressure water
Trademark: INTERPUMP GROUP
Model: SS7193, SS71106, SS71153, SS71170, SS71170-F, SN71106-F, SN71153-F, SN71170-F, SN7193, SN71106,
SN71153, SN71170, SW71170
Is found to comply with the Machinery Directive 2006/42/EC.
Standards applied: UNI EN ISO 12100 - UNI EN 809
The pump identied above meets the following essential safety and health protection requirements as listed in section 1 of
Annex I of the Machinery Directive:
1.1.2 – 1.1.3 – 1.1.5 – 1.3.1 – 1.3.2 – 1.3.3 – 1.3.4 – 1.5.4 – 1.5.5 – 1.6.1 – 1.7.1 – 1.7.2 – 1.7.4 – 1.7.4.1 – 1.7.4.2 and the relevant
technical documentation has been compiled in accordance with Annex VII B.
In addition, following a motivated request the manufacturer undertakes to provide a copy of the relevant pump technical
documentation in the manner and terms to be dened.
The pump must not be commissioned until the plant in which it is to be incorporated has been declared in to be in compliance
with the provisions of the relevant directives and/or standards.
Person authorized to compile the technical le Name: Maurizio Novelli
Address: INTERPUMP GROUP S.p.A. - Via E. Fermi, 25 -
42049 - S. ILARIO D’ENZA (RE) - Italy
Person authorised to draw up the declaration:
Reggio Emilia - October/2020
To Next Page
Loading...
