Interquartz IQ335 - DIRECTORY MEMORY OPERATIONS; DIRECTORY STORAGE AND SEARCH; DIRECTORY SCROLLING AND CAPACITY

19
To dial from a Protected Direct Access Memory
Press the desired memory key either once to dial from its one-touch memory or twice to dial from its two-
touch memory.
FIGURE 4: MEMORY PROTECT SWITCH
DIRECTORY MEMORY
The Directory memory works like the memory of a typical mobile phone, with the storage of names with
numbers and name searching capability. The keys on the keypad allow the entering of alpha and numeric
characters in the name field.
If your network does not send caller name information in conjunction with the caller’s number, the ability
of the IQ335 to display the caller’s name during an incoming call will be dependent on the caller’s
number matching a number already stored in the Directory memory. Therefore, at the time of installation
it may be useful to store names and numbers of friends, business associates and other regular callers
into the Directory memory to take immediate advantage of the name display feature. In addition, the
Calls list can be used as a convenient source of programming data – the details of any previous incoming
calls found in the Calls list can be stored in the Direct Access memory keys and/or the Directory memory
by a simple transfer process, thereby reducing key strokes and eliminating potential error that may otherwise
result during manual storage of the same details. Please see the sections entitled “To store a caller’s details
in a Direct Access memory from the Calls list” and “To store a caller’s details in the Directory memory from
the Calls list” located in the CALLER ID OPERATION section.
Scrolling ( ) and Editing ( ) keys
When reviewing any lists on the display (such as stored names and numbers), the key (also labeled
“Volume +”) and the key (also labeled “Volume –”) key serve as scrolling keys to move up and down
the lists.
To edit any errors during Memory Storage or whenever it is necessary to use the same key twice in
succession when entering text, the key and can be used to move the cursor.
Directory Memory Capacity
The Direct Access memory can store up to 100 names & numbers. When the memory is full, the display
will show “DIRECTORY FULL”.