Interquartz IQ335 - To Store a Number and Name into a Directory Memory; To Dial from the Directory Memory Using Name Search; To Edit an Entry in the Directory Memory; To Delete an Entry from Directory Memory

20
To Store a Number and Name into a Directory memory
1. Press STORE; the display will show “STORE”
2. Press DIRECTORY; the display will show “ENTER NUMBER”
3. Enter the telephone number, then press STORE; the display will show “ENTER NAME”
4. Enter the name by using the keypad
5. Press STORE; the display will show “DIRECTORY STORED”.
If the telephone number and name being stored match a previous entry, the display will show “DIRECTORY
EXIST” and the new entry will not be stored.
To dial from the Directory memory using Name Search
1. Press DIRECTORY, the first entry in the directory will be displayed
2. Enter the first alpha-numeric character of the name you wish to dial
3. Scroll (press or ) to find the name
4. Press DIAL to dial it out.
To edit an entry in the Directory memory
1. Press DIRECTORY; the first entry in the directory will be displayed
2. Scroll (press or ) to select the entry you want to edit
3. Press STORE, the first digit of the telephone number will begin to flash
4. Move the Cursor (by using or ) to navigate to the digit(s) to be changed and make the necessary
changes
5. Press STORE to confirm
6. The first letter of the name will flash; move the Cursor (by using or ) to navigate to the letters to
be changed. Make the necessary changes
7. Press STORE to confirm; the display will show “DIRECTORY STORED”.
To delete an entry from Directory memory
1. Press DIRECTORY; the first entry in the directory will be displayed
2. Scroll (press or ) to select the entry you want to delete
3. Press CLEAR twice briefly, the display will show “ERASED”.
Caution: If CLEAR is pressed continuously for 6 seconds in the above procedure, the entire directory
list may be deleted.