14
Version 2.0 (11/2013) en
Translation of the original instructions
DriveControl DC-20/DC-54
Transport and storage
Ambient conditions for transport and storage
Transport
• Every DriveControl is packaged in its own cardboard box.
Do not stack more than four cardboard boxes on top of each other.
Check that the DriveControls are correctly fixed prior to transport.
Avoid serious impacts during transport.
Inspect every DriveControl for visible damage and completeness (mating
plugs and spare tools) following transport (see "Scope of delivery", page 10).
In the event of damage, take photos of the damaged parts.
Report any damage caused by transport immediately to the transport
company and Interroll to retain the right to claim for compensation.
Do not expose the DriveControls to serious fluctuations in temperature as this
could lead to condensation.
Storage
Inspect each DriveControl for damage after storage.
Permissible ambient temperature -40 °C to 85 °C (-40 °F to 185 °F)
Permissible relative humidity 5 to 95 %
Condensation not permissible.
There is a risk of injury if transported incorrectly.
Only qualified and authorized persons should transport
the product.
Follow the instructions below.
Risk of injury due to improper storage
Do not stack more than four cardboard boxes on top of
each other.
To Next Page
Loading...