Interroll DriveControl 20 - Abandonment and Disposal; Abandonment; Disposal

29
Version 2.0 (11/2013) en
Translation of the original instructions
DriveControl DC-20/DC-54
Abandonment and disposal
Abandonment
 Disconnect all cables from the DriveControl.
 Unscrew the screws attaching the DriveControl to the conveyor frame.
 Extract the DriveControl from the conveyor frame.
Disposal
The operator is responsible for the proper disposal of the DriveControl. In doing
so, industry-specific and local provisions must be observed for the disposal of the
DriveControl and its packaging.
Risk of injury due to improper handling
 Abandonment may only be executed by qualified and
authorized persons.
 Only abandon the DriveControl after switching off the
power. Ensure that the DriveControl cannot be turned
on accidentally.
CAUTION