32
Version 2.0 (11/2013) en
Translation of the original instructions
DriveControl DC-20/DC-54
Appendix
Speed output (pin 5)
Properties not electrically isolated
Speed operating range
of motor control voltage
2.3 up to 10 V
DC
RollerDrive rotates
Stop range 0 to 2 V DC RollerDrive does not rotate
Precision of motor
control voltage
5 % Motor control voltage between2.3
and 10 V DC
at 21 °C
Motor control voltage
ripple
250 mV
pp
50 Ω
Max. load of motor
control current
0.16 to 2 mA Input resistance of RollerDrive:
66kΩ
Modification speed 4.5 to 5 V/ms 0 - 100 % motor control voltage
To Next Page
Loading...
