What to do if the actuator is not working on my Invacare Carroll CS Medical Equipment?
If the actuator on your Invacare Medical Equipment isn't working, first check if the HILO lock-out is engaged. If it is, rotate the lockout dial to the unlocked position. Also, inspect all wire connections to ensure they are secure. Connect any loose cable couplings and/or power supplies.
General| Brand | Invacare |
|---|---|
| Model | Carroll CS |
| Category | Medical Equipment |
| Language | English |
Explains the advantages of registering the product with the manufacturer for service and updates.
Directs users to the manufacturer's website for online product registration.
Instructs users to complete and mail the physical registration form on the following page.
Identifies and shows the location of labels for assist rails and bars on the bed.
Explains the meaning of signal words like DANGER, WARNING, CAUTION, and NOTE in the manual.
Details various symbols found on the CS Bed and their corresponding meanings.
Lists product certifications, electrical voltage, current, frequency, and output specifications.
Outlines safety features like protective earth ground, enclosure protection, and pendant lockout.
Provides detailed measurements, weight, and safe working load capacity of the bed.
Details hazards related to power cords, grounding, and electrical components.
Warns against unauthorized repairs and improper handling of bed components.
Addresses fire risks associated with pendants and oxygen administering equipment.
Provides critical instructions for safe grounding and handling of electrical components.
Warns about entrapment risks and requirements for mattress and rail fit.
Covers unplugging, transport limitations, maintenance checks, and caster locking.
Explains the bed's thermal protection feature and the reset procedure.
Advises against non-manufacturer parts and discusses proper bed rail usage.
Specifies the recommended dimensions and thickness for the mattress.
Warns of entrapment risks when using non-specified mattresses.
Step-by-step guide for safely removing the bed from its packaging.
Instructions for attaching the head and foot ends of the bed frame.
Details how to install mattress keeper rods to prevent patient entrapment.
Guides on how to correctly mount assist rails and bars to the bed frame.
Explains how to change the assist rail between Guard, Assist, and Transfer modes.
Describes how to switch the assist bar between Storage and Assist modes.
Explains how to use the hand control pendant to operate bed functions.
Details the procedure for raising and lowering the heel lift ratchet.
Provides instructions on where and how to store the hand control pendant.
Explains how to attach the pendant to different sides of the bed.
Instructions for storing the power cord when the bed is not in use.
Details how to engage and disengage the floor lock for bed stability.
Explains how to use the steer mechanism for easier bed movement.
Describes the procedure for using the CPR release for rapid backrest lowering.
Explains how to lock out the HILO function on the pendant.
Details the attendant control lockout mechanism on the bed frame.
Provides instructions on how to safely clean and disinfect the bed.
Lists tasks for the annual maintenance inspection of the bed.
Outlines checks to be performed on a quarterly basis.
Specifies temperature and humidity ranges for storing and transporting the bed.
Defines the safe operating temperature range for the bed.
Addresses problems with the bed not staying in place and potential causes.
Helps diagnose and resolve issues with the bed's actuators.
Provides solutions for issues with bed ends not fitting properly.
Provides details for ordering touch-up paint for the bed.
Guides users through the process of installing the trapeze adapter.
Details the limitations, exclusions, and duration of the product warranty.
Provides information on how to obtain warranty service and contact details.
Presents information from FDA's bed safety guidelines for user reference.
Presents statistics on bed rail entrapment incidents and outcomes.
Discusses assessing patient needs for safety and the role of bed rails.
Lists the advantages and potential dangers associated with using bed rails.
Strategies for meeting patient safety needs, including bed rail use.
Methods and considerations for minimizing risks associated with bed rails.
Guidance for healthcare providers on discussing bed rail use with patients and families.
Lists the organizations involved in developing the hospital bed safety guidelines.
To Next Page