Need help?Do you have a question about the Invacare Carroll CS Series and is the answer not in the manual?
General| Brand | Invacare |
|---|---|
| Model | Carroll CS Series |
| Category | Medical Equipment |
| Language | English |
Defines the bed's purpose and explains signal words for hazards and precautions.
Details symbols, ETL marks, and labels found on the CS Bed.
Lists safety certifications and details the elevation range for different CS models.
Provides electrical details like voltage, current, frequency, and pendant types.
Outlines safety features and security options for pendant connection and lock-out.
Lists overall length, length between ends, mattress platform length and width.
Provides weight specs, load capacity, and width details with assist rails.
Lists compatible mattresses and specifies recommended operating temperatures.
Provides crucial safety warnings, guidelines, and hazard information.
Details risks of electrical shock, injury, damage, and safe operating practices.
Addresses bed stability, moving risks, and severe entrapment/pinch point warnings.
Discusses entrapment risks with rails, patient conditions, and fall hazards.
Warns about fire hazards, entrapment, and incompatibility of rails/mattresses.
Explains bed rail limits and entrapment risks from mattress compression.
Details risks from improper cords, adapters, and essential grounding practices.
Specifies occupant/total weight limits and warns about cord hazards.
Advises on preventing damage during maintenance and safe battery use.
Explains susceptibility to electromagnetic interference and its common sources.
Discusses RF equipment impact on beds and provides environmental disposal guidelines.
Guides for receiving, inspecting, unpacking, and initial setup of the bed.
Details releasing straps, lowering the bed, and removing protective wrap.
Illustrates cutting ties holding the head deck, knee-foot panel, and keepers.
Instructions for plugging in power, cutting ties, and crucial inspection points.
Guides on correctly installing mattress keeper rods to prevent entrapment.
Instructions for folding keepers and adjusting bed end brackets.
Details sliding and tightening bed end brackets for proper fit and alignment.
Guides mattress positioning and installation of head/foot ends.
Steps for positioning and attaching head/foot boards to bed brackets.
Details guiding keys, locking mechanisms, and connecting ACP cables.
Advises on safe storage of cartons and disconnecting the pendant.
Instructions for using the pendant and explains the overheating protection feature.
Details pendant controls for bed movement and safe storage procedures.
Shows how to use the pendant holster and clip for secure storage.
Steps for disconnecting power and moving the pendant to the other side of the bed.
Guides on securing the power cord with straps when not in use or moving.
Details lifting the foot panel and how it rests on six pre-set stops.
Steps to reset the ratchet and warns against moving the bed with locks engaged.
Instructions on engaging and using the bed steer mechanism for easy steering.
Discusses risks associated with bed rails, entrapment, and proper installation.
Covers trapeze usage limits and assist rail stability for fall prevention.
Highlights assist bar latching risks and lists available rails and positioning devices.
Lists optional accessories like extension kits, trapeze, and transporter.
Provides details for purchasing Sherwin-Williams touch-up paint for the bed.
Explains the ACP panel's role with the pendant for bed adjustments and lockout.
Details ACP controls, lockout features, and battery indicator lights.
Explains how the HI/LO lock out switch on the pendant operates.
Mentions compatibility issues and availability of wider decks.
Guides on adjusting the CS9FX600 bed width using its eight adjustable deck wings.
Identifies adjustable sections and adjustment knobs on the CS9FX600 bed.
Step-by-step guide to loosen, depress, slide, and snap deck wings for width adjustment.
Guides on adjusting the head board width using board wings and knobs.
Provides warnings and instructions for cleaning the bed and its components.
Outlines annual maintenance checks and quarterly battery function verification.
Table for bed not staying in place or not being level, with causes and fixes.
Addresses actuator problems due to HI/LO lock-out and loose wire connections.
Covers issues with faulty actuators, pendants, and bent bed end brackets.
Details the limited warranty coverage periods, exclusions, and service contact.
To Next Page