InMode Without Vasculaze Operator Manual
Section 4: Device Description
Figure -14: Fractora Handpiece
The Fractora Handpiece contains:
The Handpiece handle is made of metal and has ergonomic
design for easy treatment with high visibility of the treated area
(Figure 4-14).
Has a length of 280cm (110’’).
The Connector is connected to the System Control Panel.
Handpiece tips have 2 sizes of pin arrays (Figure 4-15).
60 pins are 600µ long, and 24 pins are 2500µ long.
Figure -15: Fractora Tips: Left 60 pin; Right 24pin (Coated/Non-coated)
Forma/Plus Handpieces comprise an Applicator, Cable, Connector and an integral
Temperature Sensor.
Figure -16: Forma Handpiece
To Next Page
Loading...