2
inVENTer Connect controller platform | Operating instructions
Trademarks, copyrights and property rights
inVENTer
®
is a registered trademark of inVENTer GmbH.
The copyright to this document remains with the manufacturer.
Rights to all content and images: © inVENTer GmbH 2021.
All trademarks used in this document are the property of their respective manufacturers and are
hereby acknowledged.
Disclaimer
This documentation represents an translation of the original operating instructions.
The information on access to the operating instructions must be passed on to third parties when
the system is handed over.
The content of this documentation has been checked for compliance with the described
components. Nevertheless deviations may still occur, therefore no guarantee of compliance can
be provided.
This documentation describes the functionality of the standard scope. For reasons of clarity, the
documentation does not purport to cover all details on all types of the product and cannot cover
every conceivable scenario for commissioning, operation, cleaning and care.
The illustrations in this document may dier slightly from the design of the product that you have
purchased. The same functionality is ensured despite any design deviations.
This documentation is updated regularly. Necessary corrections and appropriate supplements are
always included in subsequent editions. You can nd the latest version at
www.inventer.de/downloads.
Company information
Publisher:
inVENTer GmbH Phone: +49 (0) 36427 211-0
Ortsstraße 4a Fax: +49 (0) 36427 211-113
D-07751 Löberschütz E-mail: info@inventer.de
Germany Web: www.inventer.de
CEO: Annett Wettig
VAT ID number: DE 815494982
Jena District Court HRB 510380
To Next Page
Loading...