Operation of wireless remote control
Names and functions of wireless remote control
Note: Be sure that there are no obstructions between receiver and remote controller; do not
drop or throw the remote control; do not let any liquid in the remote control or place the
remote control directly under the sunlight or any place where is very hot.
Remote Control
ON / OFF
ON / OFF button
On pressing this button, the unit will be turned ON, press it
once more, the unit will be turned OFF. When turning on or
turning off the unit, the Timer, Sleep function will be
cancelled, but the presetting time is still remained.
MODE
MODE button
Press this button, Auto, Cool, Dry, Fan, can be selected
circularly. Auto mode is default setting when the unit is
switched on. Under Auto mode, the temperature will not
be displayed
SWING
SWING button
Press this key to activate or deactivate the swing. ( This
Function is not available in this model )
FAN
FAN button
By pressing this key, you may select AUTO, FAN 1, FAN 2
or FAN 3 mode. This lets the speed of the fan be set. AUTO
is default setting. Only LOW fan speed can be set under
DRY mode.
SLEEP
SLEEP button
On pressing this button, Sleep On and Sleep Off can be selected.
After powered on, Sleep Off is defaulted. In this mode the
selected temperature will increase by 1 °C every 1 hour for 2
hours and the temperature totally increased by 2°C and will
continue in this mode until the temperature is changed or the unit
is switched OFF
Note: This feature is unavailable under FAN or DRY modes.
9
To Next Page
Loading...
Need help?
General
Weight and Dimensions
