Qubit
™
4 Fluorometer User Guide
23
If you receive the “Calibration error” message,
you can re-run the standards:
1. In the Error screen, press OK.
2. Review the Read standard screen (see Note on
page 22).
3. If you wish to re-run the standards, or run
new standards, press Read standards, then
repeat the calibration procedure (beginning
on page 18).
Note: For the RNA IQ assay, specific standards can be re-run depending
on the calibration error. The error message provides guidance on how to
correct the calibration error.
To Next Page
Loading...
