List of Function Parameters
102
Function Code Name LCD Display
P0.12 Motor parameters autotuning AUTOTUNING
P0.13 Restore parameters RESTORE PARA
P0.14 AVR function AVR
P1.00 Start Mode START MODE
P1.01 Starting frequency START FREQ
P1.02 Hold time of starting frequency HOLD TIME
P1.03 DC Braking current before start START BRAK CURR
P1.04 DC Braking time before start START BRAK TIME
P1.05 Stop mode STOP MODE
P1.06 Starting frequency of DC braking STOP BRAK FREQ
P1.07 Waiting time before DC braking STOP BRAK DELAY
P1.08 DC braking current STOP BRAK CURR
P1.09 DC braking time STOP BRAK TIME
P1.10 Dead time of FWD/REV FWD/REV DEADTIME
P1.11 FWD/REV enable when power on FWD/REV ENABLE
P1.12 Reserved RESERVED
P2.00 G/P option G/P OPTION
P2.01 Motor rated power MOTOR RATE POWER
P2.02 Motor rated frequency MOTOR RATE FREQ
P2.03 Motor rated speed MOTOR RATE SPEED
P2.04 Motor rated voltage MOTOR RATE VOLT
P2.05 Motor rated current MOTOR RATE CURR
P2.06 Motor stator resistance STATOR RESISTOR
P2.07 Motor rotor resistance ROTOR RESISTOR
P2.08 Motor leakage inductance LEAK INDUCTOR
P2.09 Motor mutual inductance MUTUAL INDUCTOR
P2.10 Current without load NO LOAD CURR
P3.00 ASR proportional gain Kp1 ASR Kp1
P3.01 ASR integral time Ki1 ASR Ki1
To Next Page
Loading...
Need help?
General