List of Function Parameters
103
Function Code Name LCD Display
P3.02 ASR switching point 1 ASR SWITCHPOINT1
P3.03 ASR proportional gain Kp2 ASR Kp2
P3.04 ASR integral time Ki2 ASR Ki2
P3.05 ASR switching point 2 ASR SWITCHPOINT2
P3.06 Slip compensation rate of VC VC SLIP COMP
P3.07 Torque limit TORQUE LIMIT
P4.00 V/F curve selection V/F CURVE
P4.01 Torque boost TORQUE BOOST
P4.02 Torque boost cut-off BOOST CUT-OFF
P4.03 V/F Slip compensation limit SLIP COMP LIMIT
P4.04 Auto energy saving selection ENERGY SAVING
P4.05 Reserved RESERVED
P5.00 S1 terminal function S1 FUNCTION
P5.01 S2 terminal function S2 FUNCTION
P5.02 S3 terminal function S3 FUNCTION
P5.03 S4 terminal function S4 FUNCTION
P5.04 ON/OFF filter times Sx FILTER TIMES
P5.05 FWD/REV control mode FWD/REV CONTROL
P5.06 UP/DOWN setting change rate UP/DOWN RATE
P5.07 AI1 lower limit AI1 LOW LIMIT
P5.08 AI1 lower limit corresponding setting AI1 LOW SETTING
P5.09 AI1 upper limit AI1 UP LIMIT
P5.10 AI1 upper limit corresponding setting AI1 UP SETTING
P5.11 AI1 filter time constant AI1 FILTER TIME
P5.12 AI2 lower limit AI2 LOW LIMIT
P5.13 AI2 lower limit corresponding setting AI2 LOW SETTING
P5.14 AI2 upper limit AI2 UP LIMIT
P5.15 AI2 upper limit corresponding setting AI2 UP SETTING
P5.16 AI2 filter time constant AI2 FILTER TIME
To Next Page
Loading...
Need help?
General