Goodrive170-PV Series Solar Pump Inverter Function parameter list
-31-
14: Overload pre-alarm
15–19: Reserved
20: External fault is valid
21: Reserved
22: Running time reached
23: Modbus communication virtual terminal
output
24–63: Reserved
27: In weak light
28: Automatically switches from automatic
switching mode to power frequency input
mode
29: Forcibly switches to power frequency input
mode
30: Switches to PV input mode
Output
terminal
polarity
selection
Used to set the polarity of output terminals.
When a bit is 0, the output terminal is positive.
When a bit is 1, the output terminal is negative.