INVT VS070QS-1618MDM1

VS070QS-1618MDM1 Integrated Machine Product overview
202403 (V1.0) 11
 Ports on the shell
The ports, from left to right, are power input interface, COM1, firmware download
port (for firmware upgrade and program download), download port (conducting
data exchange with HMI for downloading project) and LAN port (Ethernet port,
supporting Modbus TCP master-slave communication).
Power
supply
COM1
Firmware
download
port
Download
port
LAN
2.3.3 Power supply specifications
The electrical specifications for the DC power supply built in the main module are
shown in the following table (the machine can be expanded with up to 4 expansion
modules at will).
Item
Unit
Min.
value
Typical
value
Max.
value
Note
Input voltage range
VDC
21
24
30
Voltage range for proper start
and operation; Relay output
and digital input power
supplies can use 24V voltage.
Current
A
-
0.3
1.5
-
Output current
mA
-
160
-
Right-side terminal 5V/24V
Current of
expansion
modules
5V/GND
mA
-
800
-
Support 4 expansion
modules
The total power of outputs
5V/GND and 24V/GND is used
for equipment consumption
and expansion modules.
24V/GND
mA
-
600
-
Note: Adopting non-isolated power and power input nominal voltage 24 V DC.
2.3.4 Digital input characteristics and specifications
The input characteristic and signal specification are shown as follows: