VS070QS-1618MDM1 Integrated Machine Safety precautions
202403 (V1.0) 1
1 Safety precautions
1.1 Safety declaration
Read this manual carefully and follow all the safety precautions before moving,
installing, wiring, commissioning and running the programmable controller.
Otherwise, equipment damage or physical injury or death may be caused.
We shall not be liable or responsible for any equipment damage or physical injury or
death caused due to failure to follow the safety precautions.
1.2 Safety level definition
To ensure personal safety and avoid property damage, you must pay attention to
the warning symbols and tips in the manual.
Severe personal injury or even death can result if related
requirements are not followed.
Personal injury or equipment damage can result if related
requirements are not followed.
1.3 Personnel requirements
Trained and qualified professionals: People operating the equipment must have
received professional electrical and safety training, and must be familiar with all
steps and requirements of equipment installing, commissioning, running and
maintaining and capable to prevent any emergencies according to experiences.
1.4 Safety guidelines
Only trained and qualified professionals are allowed to carry out
related operations.
Do not perform wiring, inspection or component replacement
when power supply is applied.
Delivery and installation
Do not install the programmable controller on inflammables. In
addition, prevent the programmable controller from contacting or
adhering to inflammables.
Install the programmable controller in a lockable control cabinet
of at least IP20, which prevents the personnel without electrical
To Next Page
Loading...