INVT XG50KTR

Three-phase Grid-tied Solar Inverter Installation
15
4.2 Prepare before installation
4.2.1 Installation tool
Table 4-2 List of installation tools
Number
Installation tools
instruction
1
Marker pen
Mark the mounting holes
2
Electric drill
Drill holes in the bracket or wall
3
Hand hammer
Knock the expansion bolt
4
Adjustable wrench
For fixed mounting bracket
5
Hexagon screwdriver
For locking anti-theft screws and for
disassembling and disassembling AC junction
box
6
"Flat" or "Cross" screwdriver
For AC wiring
7
Meg ohmmeter
Measure insulation performance and
impedance to ground
8
Multi-meter
Detect circuit and measure AC and DC voltage
9
Electric soldering iron
Welding communication cable
10
Wire crimper
Crimp DC terminal
11
Hydraulic clamp
Crimp ring terminal for AC wiring
4.2.2 Installation environment
(1) The inverter can be installed in indoor and outdoor environment.
(2) During the operation of the inverter, the temperature of the chassis and heat sink will be relatively
high. Please do not install the inverter in the easily touched position.
(3) Do not install inverters in areas where flammable and explosive materials are stored.
(4) The inverter shall be installed in a well-ventilated environment to ensure inverter heat dissipation
(5) It is recommended to choose the installation site with shelter or build
Fig 4.2 Sunshade