Three-phase Grid-tied Solar Inverter Safety precautions
1
1. Safety precautions
iMars series grid-tied solar inverters are designed and tested strictly in accordance with relevant
international safety standards. As an electrical and electronic device, all relevant safety regulations must
be strictly complied during installation, operation, and maintenance. Incorrect use or misuse may result in：
Injury to the life and personal safety of the operator or other people.
Damage to the inverter or other property belonging to the operator or other people.
In order to avoid personal injury, damage to the inverter or other devices, please strictly observe the
following safety precautions.
This chapter mainly describes various warning symbols in operation manual and provides safety
instructions for the installation, operation, maintenance and use of the iMars series grid-tied solar
inverters.
1.1 Warning marks
Warning marks is alerting users to conditions which may cause serious physical injury or death, or
damage to the device. They also tell users how to prevent the dangers. The warning marks used in this
operation manual are shown below:
Serious physical injury or even death may
occur if not follow relevant requirements.
Physical injury or damage to the device
may occur if not follow relevant
requirements.
Damage may occur if relevant
requirements are not followed.
Do not touch the base of the inverter as it
will become hot.
The procedures taken for ensuring proper
operation.
1.2 Safety guidance
After receiving this product, first please confirm the product package is intact. If
any question, please contact the logistic company or local distributor immediately.
The installation and operation of PV inverter must be carried out by professional
To Next Page
Loading...
