During storage or transport, ensure the inverter package and the chassis is intact,
dry and clean.
The movement and installation of the inverter require at least two persons due to
its heavy weight.
Select proper tools for movement and installation to ensure the inverter can
operate normally and avoid physical injury. The installation personnel must take
mechanical protective measures such as wearing anti-drop shoes or working
clothes to protect physical security.
The inverter must be installed by professional technicians.
Do not store or install the inverter on or close to flammable and explosive objects;
Do not install the inverter in the place where children and other public can easily
touch
Remove the metal accessories in hands eg ring or bracelet before device
installation and electrical connection to avoid electric shock.
The solar cell module exposed to the sunlight may generate dangerous voltage.
Users must cover the solar cell with fully-lightproof materials before electrical
connection
The inverter input voltage cannot exceed the max input voltage, otherwise the
inverter may be damaged.
PV grid-connected inverter is not applicable to the positive or negative ground
system of solar cell panel.
Ensure inverter PE is grounded properly, otherwise the inverter cannot run
normally.
Ensure the inverter is installed firmly and electrical wiring is reliable.
Permissions by local electric power agency must be obtained and the inverter
grid-connected power generation operation must be done by professional technicians.
All electrical connections must meet the electrical standards of the countries/regions in
which the project is located.
Ensure the inverter is installed firmly and electrical wiring is reliable before operating on
the inverter.
Do not open the inverter when it is running or connecting power
To Next Page
Loading...
