Need help?Do you have a question about the Ioline 300 and is the answer not in the manual?
Instructions for removing the cutter and accessory kit from the box, emphasizing safety and saving packing materials.
Guidance on cleaning the workspace and positioning the cutter for optimal material movement.
Steps for installing the Ioline 301 Software, Control Center, and Acrobat Reader from the CD-ROM.
Procedure for connecting the cutter to the computer using power and serial/USB cables.
Instructions on peeling and aligning the adhesive sheet onto the tray with alignment marks.
Steps for applying material to the adhesive sheet on the tray and securing the tray to the table.
Guidance on choosing, installing, and adjusting the blade for proper cutting depth and force.
To Next Page
General
