try to correct the interference by one or more of the following measures:
✓
Reorient or relocate the receiving antenna.
✓
Increase the separation between the equipment and receiver.
✓
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
✓
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with Class B limits in Subpart B of
Part 15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise
specified in the manual. If such changes or modifications should be made, you
could be required to stop operation of the equipment.
Notice:
If static electricity or electromagnetism causes data transfer to discontinue midway
(fail), restart the application or disconnect and connect the communication cable
(USB, etc.) again.
www.iontheaction.co.uk EN - 3
To Next Page
Loading...
