ION TIGER XT - Page 21

TIGER XT Instrument User Manual V1.2
Pioneering Gas Sensing Technology. Page 21 of 71 ionscience.com
Peak Hold
Press the Peak Hold soft key to display the peak reading . This reading will stay on
screen, updating as the current peak reading changes. Press the Reset soft key to reset the peak
value. Press Esc to cancel.
Information
Pressing the Information soft key provides access to a list of screens which display the current
settings of the TIGER XT. Use the Up and Down keys to scroll through the list and press Enter to view
a screen. Press Esc to return to the main running screen.
First screen
Gas selected
Response Factor
Upper alarm
Lower alarm
Second screen
Lamp selected
Date of Factory Calibration
Date of Custom Calibration
Run Time
Third screen
SPAN 1
SPAN 2
PID detector in units
MiniPID 2 Sensor PID Sensor A/D reading
Fourth screen
Fifth Screen
Short Term Exposure Levels (optional)
Time Weighted Average (optional)
STEL & TWA Alarm
Internal Reference Number
Firmware version
Bootloader version
Battery type and voltage
Memory available
Gas Table Date
Date and time