ioSafe NAS - Modify Regional Options

ioSafe NAS User's Guide
Based on Synology DSM 5.0
14
Modify Regional Options
Go to Control Panel > Regional Options to configure the following regional options. For more detailed
instructions, please see DSM Help.
Time
Click the Time tab to set up the system time settings of the IoSafe NAS. You can check the current time,
manually set the server's date and time, or automatically set the time using a network time server.
Language
Click the Language tab to set the language for Synology DiskStation Manager, notifications, and specify the
codepage for Unicode filename conversion.
 Display Language: Choose your preferred display language, or have it the same as your default browser
setting.
 Notification Language: Set your preferred language for email and instant messaging notifications from IoSafe
NAS.
 Codepage: IoSafe NAS uses Unicode to avoid file inaccessibility from computers using different languages.
But for the following devices or applications to use IoSafe NAS services without problem, you need to choose
the appropriate codepage for them:
 Computers without Unicode support
 Applications that convert non-Unicode strings to Unicode, such as FTP service, UPnP support, music
metadata indexing
NTP Service
Click the NTP Service tab to have your IoSafe NAS serve as a network time server to synchronize time between
different network devices and the IoSafe NAS over network.
Note: The NTP service is required for Surveillance Station and Synology High Availability. Therefore, if you have
Surveillance Station installed and run on your IoSafe NAS, the service cannot be disabled while the package is
running.