Actuate Brakes with 12-Button Remote Control
1. Charge the Emergency side to the desired working pressure.
2. Press the Start/Air In button on the Emergency side to engage air testing.
a. Follow safety prompts and remember to chock trailer wheels prior to testing.
3. Point the remote in the general direction of the Alpha MUTT
®
.
4. Press the Air Brakes button on the remote once to engage the service air brakes.
5. Press the Air Brakes button on the remote again to disengage the brakes.
6. Repeat as necessary.
Actuate Brakes with the Tablet
1. Charge the Emergency side to the desired working pressure.
2. Press the Start/Air In button on the Emergency side to engage air testing.
a. Follow safety prompts and remember to chock trailer wheels prior to testing.
3. Press the Air Brakes button on either the Classic or Remote View on the tablet to engage the
service air brakes.
4. Press the Air Brakes button on the tablet again to disengage the brakes.
5. Repeat as necessary.
To Next Page
Loading...
