IPC CT5 - GENERAL INFORMATION; Purpose of this manual; Identifying the machine; Documentation;equipment accompanying the machine

EN
GENERAL INFORMATION
Purpose of this manual
This manual has been written by the Manufacturer and is an integral part of the equipment package
making up the machine
1
.
It denes the purpose for which the machine has been designed and built and contains all the
information needed by operators
2
.
In addition to this manual, containing information intended essentially for users, other publications
are available providing specic information for technicians entrusted with maintenance
3
.
The terms “right” and “left”, “clockwise” and “anti-clockwise” refer to the forward movement of the
machine.
Constant compliance with the instructions provided in this manual guarantees the safety of the
operator and the machine, ensures low running costs and high quality results and extends the
working life of the machine. Failure to follow these instructions may lead to injury to the operator or
damage to the machine, oor and environment.
Consult the table of contents at the beginning of the manual to nd the section of interest withou
delay.
Parts of the text requiring special attention are printed in bold and preceded by the symbols
illustrated and described here.
! DANGER
Indicates the need for attention in order to avoid a series of consequences which could
cause death or serious injury to personnel.
! WARNING
Indicates the need for attention in order to avoid a series of consequences which could
cause injury to personnel or damage to the machine or work environment or nancial loss.
! INFORMATION
Important information
In line with the company’s policy of constant product development and updating, the Manufacturer
reserves the right to make modications without prior notice.
Whilst the machine in your possession may di󰀨er appreciably from the illustrations in this document,
the safety and the information regarding the product are guaranteed reliable.
Identifying the machine
The nameplate provides the following information:
• Model
• Battery voltage.
• Rated current draw.
• Serial number.
• Year of manufacture.
• IP degree of protection.
• Gross weight.
• Maximum negotiable gradient
• Name of manufacturer.
Documentation/equipment accompanying the machine
• Operator’s manual
• Battery charger manual;
• Certicate of warranty;
• CE certicate of conformity.
1 The denition "machine" replaces the trade name “CT5” of the product to which this manual refers.
2 Persons responsible for using the machine without performing any operations requiring precise technical skills.
3 Persons with experience, technical training and a knowledge of legislation and standards, able to perform all the
necessary operations and to recognise and avoid possible risks in handling, installation, use and maintenance of this
machine.
10