IPC CT5 - TROUBLESHOOTING

EN
Periodic checks
CHECK
DAILY OPERATIONS WEEKLY OPERATIONS MONTHLY OPERATIONS
Cleaning the dirty water tank X
Cleaning the suction oats X
Cleaning the water/detergent tank lter X
Cleaning the suction lter X
Cleaning the front squeegee suction hose X
Cleaning the rear squeegee suction hose X
Cleaning the diverter valve X
Cleaning the squeegee blades X
Checking squeegee blade wear X
Checking brush wear X
TROUBLESHOOTING
[B] Battery powered model.
[C] Mains powered model.
PROBLEM CAUSE REMEDY
Machine not working.
[B] Battery low or at. [B] Recharge battery
[C] Plug disconnected. [C] Connect plug to mains socket
[B-C] Main switch not activated. [B-C] Press main switch.
Brush not rotating.
[B-C] Brush control button not
depressed.
[B-C] Press brush control button.
[B-C] Brush control lever not activated. [B-C] Operate brush control lever.
Brush motor not starting easily.
[B-C] Machine is working with a dry
brush on a particularly rough oor.
Increase the quantity of detergent.
Machine not scrubbing uniformly. [B-C] Brush or pad worn. [B-C] Replace brush.
Detergent solution not reaching brush.
[B-C] Detergent tank empty [B-C] Fill detergent tank.
[B-C] Water/detergent tank lter dirty. [B-C] Clean lter.
[B-C] Blockage in hose delivering
detergent solution to brush.
[B-C] Remove blockage.
Suction motor not working.
[B-C] Suction control button not
depressed.
[B-C] Press suction control button.
25