iPECS LIP-8012D - 6. Send & Retrieve Messages; 6.1 Responding to a Station Message Waiting Indication

LIP-8012D & LIP-8024D User Guide
51
NOTE—The mobile may reconnect to the transfer
call by pressing the # key.
In iPECS-LIK
To register a mobile phone number:
 Press the TRANS/PGM button,
 Dial 37,
 Dial the mobile phone number,
 Press the HOLD/SAVE button.
To activate a registered mobile phone:
 Press the TRANS/PGM button,
 Dial 38,
 1 to activate, 0 to deactivate,
 Press the HOLD/SAVE button.
To place a call from the mobile extension using the iPECS
System:
 Dial the ISDN DID number of the station; the system
will check the Caller ID and answer the call. The user
then will receive intercom dial tone,
 Place internal or external iPECS call as normal.
To Transfer a call from the mobile extension using the
iPECS:
 Dial “*” while on an iPECS call,
 Dial the desired extension, the call is transferred and
the mobile phone returns to idle.